Full Throttle Repair LLC Blog
http://fullthrottlerepairs.com/

Wednesday, February 20, 2013

Top 3 Reasons Your Chainsaw Won't Start!


1. No fuel! - This is usually caused by fuel sitting in the carburetor for longs periods of time, causing the ports to clog. Disassemble and clean the carburetor to remedy the issue.

2. No Air! - A dirty air filter is the cause of this issue. Remove the filter and clean with compressed air. Or just replace it
3. No Spark! - The most common cause of this is a faulty spark plug or a dirty ignition system. Replace the spark plug. Then blow out the ignition system with compressed air. Sometime it’s necessary to disassemble and clean the points on the flywheel and magneto with a fine sand paper

This also applies to other gas powered equipment. If you need any assistance or services visit our website http://fullthrottlerepairs.com/ 

 

No comments:

Post a Comment